top of page
dc6 title
dc6

DC-6 Airliner

This is a 3D printed DC-6 Airliner I designed to be light weight and fly on four 2212 1400KV motors. Build Volume required is 200x200x200. RTF weight: 3,600 grams Wingspan: 1.8m Length: 1.6m Print time: 150hrs 2kg of PLA I have a full step by step assemble video on my YouTube channel. Watch below. Keep scrolling to see more features of the DC-6.

$65.00USD

cloud
cloud

Specifications

Wingspan: 1.8m                  Print time: 150hrs

Length: 1.6m                       PLA: 2kg
RTF weight: 3,600 grams   6 Channel or more   

4x 2122 1400KV motors     4x 30amp ESCs      

Build Video

My build and flight video for the DC-6. The DC series of commercial aircraft is by far my favorite. I had been wanting to create an easy to fly, 4 engine plane for a while and this was the result. This plane features some cool new designs that maximize strength while keeping this plane as lightweight as possible. It also has a full retract system, and runs great with four 2212 1400kv motors. 

dc6 plane

Flies like scale - Fun to Build

The 3D printed DC-6 is about 1/20 scale to the real plane. This airplane uses 4 2212 1400kv motors, has a 1.8m wingspan, and a RTF weight of 3,600grams. It flies just like the real airliner! It has slow and smooth flight characteristics that make for an enjoyable and reliable RC plane experience. Great for a beginner flier.

Getting Started

This plane requires a minimum build plate volume of 200x200x200.

I got to try out the latest from FLSUN for this project. This is their V400, it is a delta style printer that truly prints great quality parts at higher speeds. 

v400
motors dc6

Not your Typical Spar

This plane features a "sparless" design. By that I mean you will not need a carbon rod. I designed an integrated spar that is within the wing instead. When the pieces are glued together, the 3D printed spar is whole and the result is an incredibly strong wing. 

dc6 retracts

Retractable Landing Gear

This plane can be flown with a fixed gear or retracts - your choice. My main concern was making these features accessible to as many as possible, so I set the plane up so that you can use the retracts and control all the surfaces on the plane with only a 6 channel transmitter. 

dc6 cover

Easy to access,less downtime!

I used eight 5x3x10mm magnets to make the hatch easy to open with plenty of room to work. A 3D printed tray holds on to your batteries. For this model, I have flown it on 2x 2700mah 3S batteries and have also flown it on 1x 5200mah 4S. Both work great. RTF weight around 3600grams.

depth tool DC6

Scale Details and Cooling

I paid close attention to the details of this plane and even visited a DC-6 in person during this project. From the motors to the tail skid. I incorporated the details into the cooling channels and vents on the nacelles to keep this plane cool during flight.

I also made an easy to use tool that allows you to accurately set the depth of your motors into the nacelle. 

dc6 ready to assemble

You're ready to build!

Thank you for deciding to build the DC-6! It is an awesome plane, I know you are going to have fun with it.

Make sure you check out my Build Tutorial, in the description you will find a complete parts list for building and assembly. 

Happy printing! See you on the next build.

bottom of page